Aluminum angle has many uses including strengthening body panels and providing a mounting point for strap-ping or body braces, typically used on the upper section of rear quarter panels and door panels. 90° angle allows supports or braces to fasten directly to the chassis. Angle is 1/8″ thick x 1″ wide and has pre-drilled 1/4″ holes on 1″ centers.
- Aluminum Angle Stock – 90 Degree – 1 in Wide – 1 in Tall – 1/8 in Thick – 30 in Long – 1/4 in Holes – Aluminum – Natural – Each or Set of 5
| Brand | Allstar Performance |
| Part Number | ALL23135 |
| Type | Angle |
| Angle Degrees | 90 Degree |
| Thickness | 1/8 in |
| Length | 30 in |
| Width | 1 in |
| Height | 1 in |
| Hole Diameter | 1/4 in |
| Hole Center to Center Spacing | 1 in |
| Material | Aluminum |
| Color | Natural |
| Finish | Natural |
| Quantity | Each or Set of 5 |
